2-1/2" x 1-5/8" End Rail Clamp For Chain Link Fences
2-1/2" x 1-5/8" End Rail Clamp For Chain Link Fences
Couldn't load pickup availability
Also known as a Gate T, the chain link fence end rail clamp is used to secure two pieces of fence pipe into a perpendicular, T-shaped formation. Sturdy, easy to use, and reliable, it is a common component for installing both commercial and residential settings. Superior rust resistance lends great resilience to the elements and extra longevity.
Installing this chain link fitting is simple. End rail clamps come are made of two identical halves that, when put together, form a pair of braces. Enclose the shorter “brace” around the center of one pipe—this creates the horizontal shaft at the top of the T-formation. Next, insert the end of the second pipe into the longer “brace” underneath, thereby creating the T’s vertical shaft. Gently work the second pipe down so that its end sits just beneath the square-shaped hole in the lower “brace.” Insert a carriage bolt (sold separately) through the hole and out the other side. Tighten using a screw on the opposite side to secure the two pieces together.
- Rust-resistant
- Carriage nut and bolt sold separately, part 11174
Due to minor manufacturing differences, actual product may vary slightly from pictures shown
Details
How the part fits? The clamp consists of 2 galvanized steel pieces that sandwich two pieces of pipe in a T joint.
Where is it installed? End rail clamps can be used to secure a bottom rail or mid-rail to a chain link fence. Commonly you will see end rail clamps used on backstops, baseball field fencing, tennis court fencing, and outdoor dog kennels.
How many do you need? Each clamp consists of 2 pieces that together sandwich one T joint. Typically you will need two clamps per post-to-post stretch of fence.
Specifications
Fits 2-1/2" outside diameter post and 1-5/8" outside diameter rail. .76 lb.
Instructions
Placing one piece of the clamp on either side of the T-joint, secure the clamp in place using a nut/bolt (sold separately, part 11174) for added strength and stability to your fencing project.
